|
Your position:Home - SolarMatrix-II
SolarMatrix-II
The Cost-Effective Ground Mount Solution for Large Scale Project
The Mount Makers SolarMatrix-II uses hot-dip galvanized, high class steel pipe embedded directly into the ground, fixed with anchor bolts into concrete or mounted on ground screws. The system is ideally suited to pre-assembly and is suitable for uneven surfaces. The solution is mostly common used in solar scale project with most cost-effective.
Specification
|
Installation Site |
Open field |
|
Foundation: |
Concrete Base or ground screw |
|
Tilt Angle： |
10-45 degree |
|
Wind Load： |
Up to 60 m/s |
|
Snow Load： |
1.4 KN/M2 |
|
Applicable Module： |
Framed or frameless |
|
Module Orientation： |
Landscape or portrait |
|
Standards: |
AS/NZS 1170, JIS C8955:2011 ,Euro Code 8,DIN 1055 |
|
Material： |
Hot Dip galvanized Q235，80um |
|
Warranty: |
10 Years | |
|
|
|
