Tin (Metal) Mounting Solution
The Mount Makers Tilt Legs are designed for the harshest environments on flat roofs or on the ground. The system is quick and easy to install, and allows solar panels to be installed in the angle ranges 10 to 15 degrees, 15 to 30 degrees and 30 to 60 degrees. To simplify connection of support rails to tilt legs, The Mount Makers and Plus rails are designed to allow standard T bolts to be simply swiveled into the rails.
Available Rail Options:
Plus
TECHNICAL INFORMATION
TECHNICAL FEATURES
Installation site: Low profile Roof or flat roof
Tilt Angle: 10~60 deg
Building Height: 20 m
Max Wind Speed: 60m/s
Snow Load: 1.4KN/m2
Standard: AS/NZS 1170,MCS012, TUV
Material: High Class Aluminum alloy Al6005-T5& Stainless steel 304
Anticorrosive: Anodized aluminum & stainless steel
Color: Natural and Customized
Warranty: Ten years warranty and twenty five years service life
KEY BENEFITS
1.Easy to install: The tilt-in module can be put into the extruded rail from the any location and can be high pre-assembly with the clamp and we use standard T bolts being attached to roof hook to minimize the time and cost of installation.
2.Offer unmatched durability: with all structural components comprised of high class stainless steel and anodized aluminum alloy, it is designed for twenty years service life and backed by ten years warranty.
3.Stand up to extreme weather: The Mount Makers SolaStrut pitched roof racking system is designed to stand up to the extreme weather complied with the AS/NZ 1170 and other international structure load standard by the skilled engineer. The main support components also have been test to guaranty its structure and load-carrying capacity.
4.Provide broad installation flexibility: These systems accommodate most commercially available framed solar panels and diverse roof types, and they can scale easily from small to large, multi-megawatt installations.
|
